產品中心 應用方案 技術文摘質量保證產品選型 下載中心業內動態 選型幫助 品牌介紹 產品一覽 聯系我們
- FP110壓力傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/10/15
Applications: Industrial pump discharge, Corrosive fluid storage, Onboard equipment monitoring, Hydraulic regulation process, Laboratory and research
Description: The FP110 is designed to measure static and dynamic pressure with the output characteristics substantially kept up to about 20% of the resonant frequency. The all stainless steel construction and flush diaphragm allow the sensor to be used under a wide variety of conditions and in temperatures up to 120 °C. Fitted with metallic strain gauges in a Wheatstone bridge circuit, the FP110 provides excellent temperature stability. It is available in standard ranges from 0 to 150 psi up to 0 to 7500 psi. An on-board A1 or A2 amplifier for high level output is optionally available. Consult Measurement-Specialties’ Engineering Department if the standard options do not meet your needs or should your application require a more comprehensive measurement system.
Features:
M16 Thread
Wide Temperature Ranges
Flush Diaphragm
High Level Tension Output Avialable
Accepts Wide Range of Fluids
典型應用: 工業泵，腐蝕液體儲藏罐，罐車監控，液壓控制，實驗室和研究
產品描述: FP110壓力傳感器專門用于靜態及動態壓力測量，且可以保證在20%諧振頻率范圍內具有良好的動態輸出特性。該傳感器采用不銹鋼齊平膜結構，工作溫度最高可達120℃。金屬應變片組成的惠斯通電橋使得FP110可以提供非常好的溫度穩定性。壓力測量范圍從0~150到7500psi。可選A1或A2級放大輸出。同時，我們還可根據客戶需求量身定制。
特點:
M16 螺紋
工作溫度寬
齊平膜式
可選放大輸出
可測量多種液體
轉載請注明來源：賽斯維傳感器網（ywhs9.com）
- 如果本文收錄的圖片文字侵犯了您的權益，請及時與我們聯系，我們將在24內核實刪除，謝謝！
